There are some steps if you want to set door handle on your cabinet, those are determine the center area to set the handle location, if you want to set one handle, choose the center area. While, if you want to set two handles, you have to consider the left and right side in same size. Then, determine the screw size to measure the thickness of door board. Notice the size and the type of the screw in order to bind strongly on the door. Usually, the size of the screw around 1,5 inch to 2 inch. Determine the hole of the screw with the diameter of screw rods to choose the appropriate type of drill. The diameter cannot be larger or smaller, it must be 0,5mm. After that, drill the screw carefully, it is better if you out a piece of board under the hole to keep the surface of the door. The last is attaching and tightening the handle on that right position.
All graphics and other visual elements as well as any sign reproduced on the display products reproduced on the Website belong to their respective owners and users and is provided AS IS for your personal information only. Copyright © 2004–2019 Moorish Falafel.